The most common skate sharpening radius we see for ice hockey players is a 1/2″ inch or 5/8″ inch cut.
- 1 What skate radius do NHL players use?
- 2 What is the default radius for hockey skates?
- 3 What is standard skate sharpening radius?
- 4 What radius do Bauer skates come with?
- 5 What skates do most NHL players wear?
- 6 What is the standard hollow for hockey skates?
- 7 What does rocker mean on skates?
- 8 What profile does McDavid use?
- 9 What do most NHL players sharpen their skates?
- 10 How often do NHL players sharpen their skates?
- 11 How do I check my skate edges?
- 12 Do new hockey skates need to be profiled?
- 13 Does skate profile matter?
- 14 What does getting your skates profiled mean?
What skate radius do NHL players use?
A standard profile for a hockey skate is 13′: the blade has the curve of a circle with a 13-foot radius. Different profiles affect how much of the skate blade is in contact with the ice at any one time.
What is the default radius for hockey skates?
Altering the shape of the wheel’s surface will alter the size of the hollow it imparts on your skates. A larger radius will mean a flatter grinding wheel, and therefore a skate with less hollow cut away from its centre. The normal range for this is ⅜” to ¾”, although higher or lower hollows are occasionally seen.
What is standard skate sharpening radius?
The most common radius of hollow cuts are ½” and 5/8” for skate sharpening shops because it provides the best balance between edge depth and glide speed. VS. Profiling a skate, sometimes called a contour or rocker, means shaping the overall arch of the blade from front to back.
What radius do Bauer skates come with?
If you’re a great skater but feel like you could use some extra turning ability then you can go with a 9′ or lower although Bauer for example has all of their skates come out with a 9′ radius.
What skates do most NHL players wear?
More than two-thirds of NHL players wear Bauer skates. Some of those players may use aftermarket blades (more on those in a bit), but when Bauer introduces a new runner, it’s usually a big deal.
What is the standard hollow for hockey skates?
There are several different types of hollows to choose from, but pro shops will commonly use 1/2” as their “standard” cut. The 1/2” hollow offers a respectable mix of glide and control for most players but adjusting the depth of the hollow can offer several benefits when done correctly.
What does rocker mean on skates?
Often referred to as the profile, rocker, or contour of your skate blade, these terms all refer to the curvature of your skate blade from heel to toe. For example hockey player skate profiles can range from 7′ to 13′ rockers with the most popular being 9′ and 11′, while goalie skates are usually around a 28′ rocker.
What profile does McDavid use?
Connor McDavid uses custom Tydan Performance Blades. Connor McDavid runs a 10′ profile. We sell Tydan Performance Blades.
What do most NHL players sharpen their skates?
It’s a 3-millimeter-wide piece of steel hollowed out down the middle in an inverted U to create two edges. An NHL player uses both edges on both skates, like a skier shifting weight from side to side during turns. Most recreational players just want their skates sharpened.
How often do NHL players sharpen their skates?
The Simple Answer. A good rule of thumb for active hockey players is to get their skates sharpened after 15–20 hours on the ice. If you’re really pushing hard on your edges, you may want to sharpen them a little more often.
How do I check my skate edges?
Testing for Even Edges Bring the skate blade to eye-level and look down the blade towards the coin. If there is a significant height difference between the inside and outside edge, it will be visible; you’ll see one side of the coin will be higher than the other.
Do new hockey skates need to be profiled?
When you buy a new pair of skates they come with a factory grind on the steel. It is recommended that you get them profiled before skating in them. The most common profiles are 7 foot 9 foot 11 foot and 13 foot. Most players go with a 9 foot radius, but there are many options to consider.
Does skate profile matter?
If you are actually getting them completely profiled, then it’s a matter of how drastic a change your new profile is from that of a manufacturer’s stock profile. I agree that the new runners supplied with skates will have matching profiles, they are machine cut and match with a few thousandths of an inch.
What does getting your skates profiled mean?
Skate “Profiling” involves changing the shape of the skate blade to help a player maximize their skating potential. Profiling is also referred to as rockering, radiusing, contouring, and body-balance contouring.