Question: How To Measure Field Hockey Sticks?

To measure, you should hold your stick at your side and the top should be 2 inches below your waist. The Dutch method is based on holding the head of the stick in your armpit. The stick should end near the middle of your kneecap. Field hockey sticks’ length varies from 28” to 38”.

How do you measure a child for a hockey stick?

HOCKEY STICK LENGTH GUIDE

  1. Junior Hockey Sticks are available in sizes 24” up to full size 36.5”.
  2. To measure a child (5 Ft 2” or under) hold the hockey stick at their side and it should be at their hip or belly button.
  3. If you cannot decide between two lengths, you should consider your child’s position.

How do I find the best field hockey stick for me?

Midfielders should choose an average-size stick of about 21 ounces to accommodate offensive and defensive plays. Forwards often go for a lightweight stick less than 21 ounces. Most players carry at least two sticks for practice or play. If you switch positions, you may choose a stick for each position.

You might be interested:  Often asked: How To Bake Hockey Skates?

What size is a junior hockey stick?

Adult (or Senior) sticks are generally in the 60-inch range, Intermediates around five inches shorter, Juniors in the 46- to 54-inch range.

How do you measure a hockey stick without skates?

A good way to measure your stick is to stand, without skates in your stocking feet, on a flat surface. Place the toe of your stick on the ground between your feet. Lean the stick straight up-and-down so the handle of the stick touches the tip of your nose.

Can you cut down a field hockey stick?

having the proper stick length can drastically affect your game. A trimmed down stick will now “feel” stiffer because there is less room between your hands, and by cutting down the stick you have lost leverage. When you shorten your hockey stick, it will perform more like a stick with a higher flex number.

What do you need for field hockey?

Safe Field Hockey Gear

  1. Cleats. Choose a pair of shoes with molded cleats or ribbed soles.
  2. Shin guards. Field hockey shin guards, which are made of plastic and foam, wrap farther around the lower leg and offer more ankle protection than soccer shin guards.
  3. Safety or sports glasses.
  4. Mouthguards.
  5. Gloves.
  6. Masks.

Are there left handed field hockey sticks?

According to the rules of the International Hockey Federation, left-handed field hockey sticks are illegal for use in sanctioned competitions or field hockey tournaments. While it is possible to obtain a customized left-handed field hockey stick, you will not be able to use it during official competition.

You might be interested:  Readers ask: What Division Is Boston College Ice Hockey?

Are field hockey sticks supposed to be bent?

The stick handle may be bent or ‘deviated’, in a smooth curve only, once only to either side. It is therefore possible to have a hockey stick with a handle deviation to the front or toe side or a handle deviation to the back or ‘heel’ side or a stick-handle that is bent once to both the toe and ‘heel’ sides.

What is the difference between a junior and intermediate hockey stick?

Each size normally reflects a smaller shaft circumference and a softer flex. Senior sticks are usually used by players ages 14 and up; intermediate for ages 10-15; junior for ages 7-12; and youth for players ages 4-8. Adult women generally use intermediate or flexible senior sticks.

What is the difference between intermediate and senior hockey sticks?

Stick Length and Flex An intermediate hockey stick typically is about 54 inches long; a senior hockey stick usually is 56 to 63 inches long. The amount of flex in the stick depends on how much you cut off from the top of the stick. A rule of thumb is that the more you cut off, the stiffer the flex.

What is the toe of a hockey stick?

The toe is the very end of the blade, and it comes in two basic shapes: round and square, as Figure 4 shows. The difference is that a square toe offers more blocking area and the round toe gives more puck control at the tip. Finally, the “lie” is the angle the blade makes relative to the shaft.

Leave a Reply

Your email address will not be published. Required fields are marked *